Fencing
Using the various materials such as wood, metal, vinyl, or chain-link to create a unique fence of your choosing to either assist with enclosing your property, enhance your privacy, improve your security, create property boundaries, or to just add aesthetic appeal to your home, we are happy to oblige to any of your fencing needs.
Tree Cutting
We start with assessing the requested tree for removal. Then, we survey the surrounding area of the tree to ensure the safe removal of it. The tree is then slowly dismantled using our equipment, typically starting with making several notches to remove most if not all of the large branches of the tree, and once complete we can then begin the process of the trunk removal by cutting the side facing the direction the tree will fall followed by a horizontal cut on the opposite side to begin felling the trunk. After the tree is down, we then cut it into manageable sections and dispose of these sections upon your request. Stumps may also be grounded down or removed.
Concreting
We begin with clearing the area and prepare the requested form of the concrete. The concrete is then prepared by combining cement, water, sand, and aggregates (like gravel) into the right proportions to achieve the desired mix consistency. We then pour the mixed concrete into the prepared form from before, starting at one end and filling it more or so evenly until completely filled. Next we level the surface and smooth it down using our tools until the floor is entirely symmetrical. Depending on the requested design this is also where we begin to design the concrete before finally letting the concrete cure and harden, which typically takes several days so it may solidify properly.
Decking
Decking is the process of constructing a flat surface, usually made of wood, composite materials, or other sturdy substances, that is typically used for outdoors patios, gardens, or around pool areas. We start with planning and designing the deck’s size, layout, and materials, while considering the space it will take up. We next prepare with clearing the area and leveling the ground. If necessary, we install a support structure like posts, beams, and joists. Then we lay the decking boards out across the support structures. These boards are then fastened with screws or nails. The arrangement can vary based on the requested design preference. Finally we finish this up with a protective stain to improve the deck’s durability and appearance.
